Dell PowerConnect 6224 - Show Ip Ospf Area

906 OSPF Commands
User Guidelines
There are no user guidelines for this command.
Example
console#show ip ospf abr
Type Router Id Cost Area ID Next
Hop Next Hop
I
ntf
----- --------- ----- --------------- --------- -
-------
INTRA 3.3.3.3 1 0.0.0.1 10.1.23.3 v
lan11
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 v
lan12
show ip ospf area
Use the show ip ospf area command in Privileged EXEC mode to display
information about the identified OSPF area.
Syntax
show ip ospf area area-id
• area-id — Identifies the OSPF area whose ranges are being displayed.
(Range: 0–4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.