Command Groups 91
DHCPv6
bootpdhcprelay
maxhopcount
Configures the maximum allowable relay agent
hops for BootP/DHCP Relay on the system.
GC
bootpdhcprelay
minwaittime
Configures the minimum wait time in seconds
for BootP/DHCP Relay on the system.
GC
show bootpdhcprelay Shows the the BootP/DHCP Relay information. GC
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
clear ipv6 dhcp Clears DHCPv6 statistics for all interfaces or for
a specific interface.
PE
dns-server Sets the ipv6 DNS server address which is
provided to a DHCPv6 client by the DHCPv6
server.
v6DP
domain-name Sets the DNS domain name which is provided
to a DHCPv6 client by the DHCPv6 server.
v6DP
ipv6 dhcp pool Enters IPv6 DHCP Pool Configuration mode. GC
ipv6 dhcp relay Configures an interface for DHCPv6 relay
functionality.
IC
ipv6 dhcp relay-agent-info-
opt
Configures a number to represent the DHCPv6
Relay Agent Information Option.
GC
ipv6 dhcp relay-agent-info-
remote-id-subopt
Configures a number to represent the DHCPv6
the “remote-id” sub-option.
GC
ipv6 dhcp server Configures DHCPv6 server functionality on an
interface.
IC
prefix-delegation Defines Multiple IPv6 prefixes within a pool for
distributing to specific DHCPv6 Prefix
delegation clients.
v6DP
service dhcpv6 Enables DHCPv6 configuration on the router. GC
show ipv6 dhcp Displays the DHCPv6 server name and status. PE
show ipv6 dhcp binding Displays the configured DHCP pool. PE
Command Description Mode*
To Next Page
Loading...
