92 Command Groups
DVMRP
IGMP
show ipv6 dhcp interface Displays DHCPv6 information for all relevant
interfaces or a specified interface.
UE
show ipv6 dhcp pool Displays the configured DHCP pool. PE
show ipv6 dhcp statistics Displays the DHCPv6 server name and status. UE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
ip dvmrp S
ets the administrative mode of DVMRP in the
router to active.
GC
IC
ip dvmrp metric Configures the metric for an interface. IC
ip dvmrp trapflags Enables the DVMRP trap mode. GC
show ip dvmrp Displays the system-wide information for
DVMRP.
PE
show ip dvmrp interface Displays the interface information for DVMRP
on the specified interface.
PE
show ip dvmrp neighbor Displays the neighbor information for DVMRP. PE
show ip dvmrp nexthop D
isplays the next hop information on
outgoing interfaces for routing multicast
datagrams.
PE
show ip dvmrp prune Displays the table that lists the router’s
upstream prune information.
PE
show ip dvmrp route Displays the multicast routing information for
DVMRP.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
ip igmp Sets the administrative mode of IGMP in the
system to active.
GC
Command Description Mode*
To Next Page
Loading...
