Dell PowerConnect 6224 - Debug Auto-Voip

Serviceability Tracing Packet Commands 1201
debug arp
Use the debug arp command to enable tracing of ARP packets. Use the “no”
form of this command to disable tracing of ARP packets.
Syntax
debug arp
no debug arp
Default Configuration
ARP packet tracing is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug arp
debug auto-voip
Use the debug auto-voip command to enable Auto VOIP debug messages.
Use the optional parameters to trace H323, SCCP, or SIP packets respectively.
Use the “no” form of this command to disable Auto VOIP debug messages.
Syntax
debug auto-voip [ H323 | SCCP | SIP ]
no debug auto-voip [ H323 | SCCP | SIP ]
Default Configuration
Auto VOIP tracing is disabled by default.