Dell PowerConnect 6224 - Show Stack-Port Diag

1318 System Management Commands
show stack-port diag
NOTE: This command is intended only for Field Application Engineers (FAE) and
developers. An FAE will advise when to run this command and capture this
information.
Use the show stack-port diag command in Privileged EXEC mode to display
front panel stacking diagnostics for each port.
Syntax
show stack-port diag
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the front panel stacking
diagnostics.
console#show stack-port diag
1/xg1:
RBYT:0 RPKT:0 TBYT:e38b50 TPKT:d1ba
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
console#show stack-port diag
1/xg2:
RBYT:0 RPKT:0 TBYT:e38b50 TPKT:d1ba
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0