Dell PowerConnect 6224 - Show Switch

System Management Commands 1323
show switch
Use the show switch command in User EXEC mode to display information
about all units in the stack. Use the show switch [
unit ] command to display
the information about a specific unit on the stack.
Syntax
show switch [ unit ]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays stack status information for the switch.
console>show switch 1
Switch............................ 1
Management Status................. Management Switch
Admin Management Preference....... 4
Switch Type....................... 0x73950001
Preconfigured Model Identifier.... PCM8024
Plugged-in Model Identifier....... PCM8024
Switch Description This field displays the description for the
supported switch type.
Field Description