Dell PowerConnect 6224 - Page 1322

1322 System Management Commands
The following example displays the format of the show supported switchtype
[
switchindex ] command.
console#show supported switchtype 1
Switch Type....................... 0x73950001
Model Identifier.................. 6224
Switch Description................ PowerConnect 6224
Management Preference............. 1
Expected Code Type................ 0x100b000
Supported Cards:
Card Index (CID)............... 3
Model Identifier............... PCM8024
The following table describes the fields in the example.
Field Description
Switch Index (SID) This field displays the index into the database of
supported switch types. This index is used when
preconfiguring a member to be added to the
stack.
Model Identifier This field displays the model identifier for the
supported switch type.
Management Preference This field indicates the management preference
value of the switch type.
Code Version This field displays the code load target identifier
of the switch type.
Field Description
Switch Type This field displays the 32-bit numeric
switch type for the supported switch.
Model Identifier This field displays the model identifier for
the supported switch type.