System Management Commands 1321
Syntax
show supported switchtype [
switchindex
]
•
switchindex
— Specifies the index into the database of the supported
switch types, indicating the type of the switch being preconfigured. The
switch index is a 32-bit integer. (Range: 0–65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the information for supported switch types.
console>show supported switchtype
Mgmt Cod
e
SID Switch Model
ID Pref Type
-----------------------------------------------------
-----
1 0x100b000
2 PCT6248 1
0x100b000
The following table describes the fields in the example.
To Next Page
Loading...
