802.1x Commands 637
show dot1x statistics
Use the show dot1x statistics command in Privileged EXEC mode to display
802.1x statistics for the specified interface.
Syntax
show dot1x statistics ethernet
interface
•
interface
— Ethernet port name. The full syntax is
unit/port
.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x statistics for the specified interface.
console#show dot1x statistics ethernet 1/g2
Port........................................... 1/g2
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................
0000.0000.0000
EAP Response/Id Frames Received................ 0
To Next Page
Loading...
