Syslog Commands 1279
Default Configuration
Disabled
Command Mode
Global Configuration
User Guidelines
To see the CLI commands by using the show logging command.
Example
console(config)#logging cli-command
<189> JAN 13 05:20:27 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2113 %% CLI:EIA-
232:----:vlan 3
<189> JAN 13 05:20:27 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2114 %% CLI:EIA-
232:----:ex
<189> JAN 13 05:20:28 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2115 %% CLI:EIA-
232:----:
<189> JAN 13 05:20:39 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2116 %% CLI:EIA-
232:----:show logging file
logging
Use the logging command in Global Configuration mode to log messages to a
syslog server. To delete the syslog server with the specified address from the
list of syslogs, use the no form of this command.
Syntax
logging {
ip-address
|
hostname
}
To Next Page
Loading...
