Dell PowerConnect 6224 - User Name

Captive Portal Commands 1083
Syntax
user user-id group group-id
• user-id —User ID (Range: 1–128).
•
group-id —Group ID (Range: 1–10).
Default Configuration
A user is associated with group 1 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#user 1 group 3
user name
Use the user name command to modify the user name for a local captive
portal user.
Syntax
user user-id name name
• user-id —User ID (Range: 1–128).
•
name —user name (Range: 1–32 characters).
Default Configuration
There is no name for a user by default.
Command Mode
Captive Portal Configuration mode.