Dell PowerConnect 6224 - Show Captive-Portal Interface Client Status

Captive Portal Commands 1077
0002.BC00.1291 10.254.96.48
1/g2
2 cp2 0002.BC00.1292 10.254.96.49
1/g3
3 cp3 0002.BC00.1293 10.254.96.50
1/g4
console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client Client
MAC Address IP Address Interface Interface
Description
-------------- --------------- --------- ------------------
--------------
0002.BC00.1290 10.254.96.47 1/g1 Unit: 1 Slot: 0
Port: 1 Gigabit
0002.BC00.1291 10.254.96.48 1/g2 Unit: 1 Slot: 0
Port: 2 Gigabit
show captive-portal interface client status
Use the show captive-portal interface client status command to display
information about clients authenticated on all interfaces or a specific
interface.
Syntax
show captive-portal interface interface client status
• interface —A valid interface in unit/port format.
Default Configuration
There is no default configuration for this command.