Command Groups 77
QoS
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
assign-queue Modifies the queue ID to which the associated
traffic stream is assigned.
PCM
C
class Creates an instance of a class definition within
the specified policy for the purpose of defining
treatment of the traffic class through
subsequent policy attribute statements.
PMC
class-map Defines a new DiffServ class of type
match-all
,
match-any,
or
match-access-group
. For now,
only
match-all
is available in the CLI.
GC
class-map rename Changes the name of a DiffServ class. GC
classofservice dotlp-
mapping
Maps an 802.1p priority to an internal traffic
class for a switch.
GC
and IC
classofservice ip-dscp-
mapping
Maps an IP DSCP value to an internal traffic
class.
GC
classofservice trust Sets the class of service trust mode of an
interface.
GC
and IC
conform-color Specifies for each outcome, the only possible
actions are drop, setdscp-transmit, set-prec-
transmit, or transmit
PCM
C
cos-queue min-bandwidth Specifies the minimum transmission bandwidth
for each interface queue.
GC
and IC
cos-queue strict Activates the strict priority scheduler mode for
each specified queue.
GC
and IC
diffserv Sets the DiffServ operational mode to active. GC
drop Use the drop policy-class-map configuration
command to specify that all packets for the
associated traffic stream are to be dropped at
ingress.
PCM
C
Command Description Mode*
To Next Page
Loading...
