Dell PowerConnect 6224 - Page 920

920 OSPF Commands
User Guidelines
This command has no user guidelines.
Example
The following examples display information about OSPF neighbors on the
specified Ethernet and IP interfaces.
console #show ip ospf neighbor 10.1.23.50
Interface................................. vlan 20
Neighbor IP Address....................... 10.1.13.50
Interface Index........................... 65
Area Id................................... 0.0.0.1
Options................................... 0x42
Router Priority........................... 1
Dead timer due in (secs).................. 33
Up Time................................... 4 days 12 hrs 56
mins 6 secs
State..................................... Full/DR
Events.................................... 13
Retransmission Queue Length............... 0
Restart Helper Status..................... Helping
Restart Reason............................ Software Restart
(1)
Remaining Grace Time...................... 10 sec
Restart Helper Exit Reason................ In Progress
Field Descriptions
Interface — The name of the interface on which the adjacency is formed.
Neighbor IP Address
— The IPv4 address on the neighbor's interface used to
form the adjacency.
Interface Index
— The SNMP interface index.