Dell PowerConnect 6224 - Page 1001

PIM-SM Commands 1001
Syntax
show ip pimsm interface [ vlan vlan-id ]
• vlan-id — Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays interface information for VLAN 11 PIM-SM.
console#show ip pimsm interface vlan 11
Interface...................................... 11
IP Address.....................................
0.0.0.0
Subnet Mask....................................
0.0.0.0
Mode...........................................
Disable
Hello Interval (secs).......................... 30
secs
CBSR Preference................................ 0
CRP Preference................................. 0
CBSR Hash Mask Length.......................... 30