Dell PowerVault ML6000 - Rack-Mount Kit Contents; Table 7 Rack-Mount Kit Contents

PowerVault ML6000 Maintenance Guide 109
Rack-mount Kit Contents
You only need one rack-mount kit per library. The rack-mount kit allows you to secure the bottom module
in the rack. It includes rack ears for additional security.
Note
The rack-mount kit cannot be used with every type of rack. Racks with
threaded rails or unique hole spacing, for example, may not support the rack-
mount kit. In addition, the rack must have rail spacing (front to rear) of between
605 mm (23.8 in.) and 770 mm (30.3 in.).
Table 7 Rack-mount Kit Contents
Component Description Quantity
Small ferrule — Used in racks
with round holes
10 (8 required; 2
spares)
Large ferrule — Used in racks
with square holes
10 (8 required; 2
spares)
Thumbnut — Secures the rack
shelves to the rack
8
M5 thumbscrew — Secures the
rack ears
4
Rack ear, left — Holds the
modules in the rack
1