364 Troubleshooting the Tape Library
T193
T193 - Suspect Drive Command
Description GUI Description: The tape drive reported a multi-initiator command conflict.
Explanation: The library detected that a tape drive is experiencing conflicting
drive commands from multiple hosts/initiators. This issue is most likely due to
multiple initiators requesting drive operations without properly reserving the
drive for Input/Output (I/O) operations.
Detection Scenarios The tape drive generated and reported a multi-initiator command conflict.
Root Causes The tape drive has determined and reported a problem per its internal error
analysis algorithms.
Service Resolution
Steps
Perform DR147 – Resolve Suspect Drive Command
on page 420.
Possible CRUs/FRUs None
To Next Page
Loading...
Need help?
General