312 Troubleshooting the Tape Library
T112
T112 - Invalid Tape Drive Firmware Image
Description GUI Description: A stored tape drive firmware image is not usable for auto-
leveling of a tape drive.
Explanation: During initialization, or when a drive is inserted while the library
is operating, the library checks the product firmware level of the installed tape
drive (brick) and compares that version to the version that it stores internally in
its file system. If they are not the same, the library automatically updates the
tape drive (brick) with this internally stored firmware image.
Detection Scenarios The automatic update of the tape drive firmware fails.
Root Causes The tape drive firmware image stored on the library’s file system is corrupt.
Service Resolution
Steps
Perform DR072 - Resolve
Tape Drive Auto-Level Failure on page 398.
Possible CRUs/FRUs None
To Next Page
Loading...
