PowerVault ML6000 Maintenance Guide 333
T134
T134 - Barcode Scanner Malfunction
Description GUI Description: The library barcode scanner cannot read any barcode
labels.
Explanation: The barcode scanner is unable to detect target information. The
barcode scanner cannot detect any barcodes within the library.
Detection Scenarios The library was unable to detect any barcodes when scanning target columns
at startup.
Root Causes • Barcode scanner illumination is insufficient.
• Barcode scanner view is obscured (blocked).
• Barcode scanner failed.
Service Resolution
Steps
Perform DR100 - Resolve Barcode Scanner Malfunction
on page 411.
Possible CRUs/FRUs Note: Read and perform all resolution steps before dispatching any parts.
Dispatch the first part listed below for replacement. If this does not solve the
problem, dispatch the second part, and so on, in order. Dispatch only one part
(or set of parts) at a time.
1 Picker Assembly (if Model 1 robot is installed) or
Robot Assembly (if Model 2 robot is installed)
To Next Page
Loading...
Need help?
General