PowerVault ML6000 Maintenance Guide 71
Figure 16 Library Configuration Example 1
2 If cleaning slots are configured for automatic, library–initiated cleaning operations, export all affected
cleaning media from the elements contained within the module you are removing or replacing.
3 If cleaning slots are affected and all cleaning media has been exported from the module you are
removing or replacing, reduce or delete the cleaning slots so that cleaning slots are no longer configured
within the module you are removing or replacing. You can designate new cleaning slots after the module
has been removed or replaced.
4 If the module you are removing or replacing contains tape drives, make sure that none of the drives
have media mounted.
5 If the module you are removing or replacing contains I/E slots, remove all media from the affected I/E
slots and store them separately for each partition so you can import them back into the same partition
once the module removal or replacement is complete.
6 If one or more partitions reference any storage slots within the module you are removing or replacing,
export all tape cartridges from the affected partitions and keep the exported cartridges separated by
partition, so you can import them back into the same partition once the module removal or replacement
is complete.
To Next Page
Loading...
Need help?
General