32 Library Installation and CRU Replacement
Figure 9 Multi-Module Fibre Channel Cabling
1 Ethernet cable to customer
network
2 GB Ethernet port
3 Power supplies
4 Rear power switches
5 Power cords
6 Fibre cables to host
7 Module terminators
8 Library control blade (LCB)
9 Module-to-module cable
ALL LIBRARIES TALLER THAN 14U MUST BE INSTALLED IN A RACK
HAVING A MAIN PROTECTIVE EARTHING (GROUNDING) TERMINAL,
AND POWER MUST BE SUPPLIED VIA AN INDUSTRIAL PLUG AND
SOCKET-OUTLET AND/OR AN APPLIANCE COUPLER COMPLYING
WITH IEC 60309 (OR AN EQUIVALENT NATIONAL STANDARD) AND
HAVING A PROTECTIVE EARTH (GROUND) CONDUCTOR WITH A
CROSS SECTIONAL AREA OF AT LEAST 1.5 MM
2
(14 AWG).
TO ENSURE PROPER AIRFLOW AND ACCESS SPACE, ALLOW 60 CM
(24 INCHES) IN THE FRONT AND BACK OF THE LIBRARY.
Pay attention to where the operator panel is positioned in the rack for optimum
usability.
To Next Page
Loading...
