PowerVault ML6000 Maintenance Guide 145
Table 10 CRUs and FRUs
Part Name CRU/FRU Reference Information
5U Library Control Module CRU Installing a Stand-Alone
5U Library Control Module on
page 46
Replacing
a 5U Library Control Module on page 84
9U Expansion Module CRU Installing a New
Multi-Module Library Configuration on
page 47
Adding 9U Expansion Module
s to an Existing Library
on page 56
Permanently Removing 9U Expansion Modules From
an Existing Library on page 75
Replacing a 9U Expansion Module
on page 92
Cable Spool FRU R
emoving and Replacing the Cable Spool on
page 181
FC I/O Blade CRU Adding, Removing, and Replacing FC I/O Blades
on
page 130
FC I/O Fan Blade CRU Adding, Removing, and Replacing the FC I/O Fan
Blade on page 137
Front Bezels FRU Removing and Replacing Front Bezels
on page 146
Drive Power Fuse FRU Removing and Replacing the Drive Power Fuse
on
page 148
I/E Station Lock Assembly FRU R
emoving and Replacing the I/E Station Lock
Assembly on page 150
I/E Station Safety Door (5U) FRU Removing and Replacing the
I/E Safety Door from a
5U Library Control Module on page 155
I/E Station Safety Door (9U) FRU Removing and Replacing the
I/E Station Safety Door
from a 9U Library Expansion Module on page 158
I/E Station Slide Assembly FRU Removing and Replacing the
I/E Station Slide
Assembly on page 151
Library Control Blade and
Compact Flash Card
CRU Removing and Replacing the Library Control Blade
and LCB Compact Flash Card on page 102
Module Terminators CRU Cabling the Library
on page 22
Module-to-Module Cables CRU Cabling the Library
on page 22
LCD Front Panel Display
(Operator Panel)
FRU Removing and Replacing the Operator Panel (LCD)
on page 162
Picker Assembly (Model 1) FRU Removing and
Replacing the Model 1 Picker
Assembly from the Y-Carriage Assembly Inside the
Library on page 176
Power Supply CRU Adding, Removing, and Replacing Power Supplies
on
page 106
Rack-mount Kit CRU Using
the Rack-mount Kit to Install a Library in a Rack
on page 108
To Next Page
Loading...
Need help?
General