Dell PowerVault ML6000 - Table 4 Cover Plate Location

PowerVault ML6000 Maintenance Guide 51
• If you plan to stack the 5U Library Control Module between 9U Expansion Modules, remove both
the top and bottom plates of the 5U Library Control Module. Also remove the top plate of the 9U
Expansion Module located below the 5U Library Control Module and the bottom plate of the 9U
Expansion Module located above the 5U Library Control Module.
• If you plan to stack the 5U Library Control Module at the bottom of the library, and if a 9U Expansion
Module will be located above it, remove the 5U Library Control Module’s top plate and the 9U
Expansion Module’s bottom plate.
* Recommended location for adding an expansion module.
Table 4 Cover Plate Location
ML6010 ML6020 ML6030
ML6030 CM + 1
9U Expansion
Module
ML6030 CM + 2
9U Expansion
Modules
cover plate
cover plate NEW 9U
Expansion
Module*
cover plate 5U Library
Control Module
5U Library
Control Module
cover plate 5U Library
Control Module
9U Expansion
Module
9U Expansion
Module
cover plate 5U Library
Control Module
9U Expansion
Module
9U Expansion
Module
9U Expansion
Module
5U Library
Control Module
NEW 9U
Expansion
Module*
NEW 9U
Expansion
Module*
NEW 9U
Expansion
Module*
9U Expansion
Module
cover plate cover plate cover plate cover plate cover plate