PowerVault ML6000 Maintenance Guide 261
Possible CRUs/FRUs Note: Read and perform all resolution steps before dispatching any parts.
Dispatch the first part listed below for replacement. If this does not solve the
problem, dispatch the second part, and so on, in order. Dispatch only one part
(or set of parts) at a time.
1 Picker Assembly (if Model 1 robot is installed) or
Robot Assembly (if Model 2 robot is installed)
2LCB
3 Module (EM or CM) — only dispatch this FRU if the label is missing or
damaged
T063 - WWN Label Change
To Next Page
Loading...
