Plate position status and plate run status in the Remote Monitoring software home screen
Status
Description
Plate position status
Occupied A plate is present in the corresponding position in the instrument drawer. These
positions are labeled as Link plate file in the instrument home screen.
Available The corresponding position in the instrument drawer is empty.
A named plate is shown The plate in the corresponding position in the instrument drawer is linked to a
plate file. Possible statuses are listed below.
Plate run status
In queue An injection is waiting to start. The injection will start based on the order of the
injection list.
Running Data collection for the injection is in process.
Analyzing Data collection for the injection is complete, analysis is in process.
Completed Analysis and export is complete, results are available.
Aborting/aborted An injection with status of Running was cancelled.
Cancelled An injection with status of In queue was cancelled.
Paused The instrument was paused or an injection was cancelled and the pause
immediately option was selected.
The pause and cancel commands can be issued in the SeqStudio
™
Flex Remote
Monitoring software or on the instrument.
Runs must be resumed on the instrument.
Chapter 8 Use the Remote Monitoring software to monitor runs, view results, and use cloud analysis
Monitor a run from the Remote Monitoring software
8
186
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
To Next Page
Loading...
