Thermo Scientific appliedbiosystems SeqStudio Flex Series - Page 365

6.
Invert the ABC, then tilt it to move most of the buer to the larger chamber of the container. The
smaller chamber of the container should contain <1 mL of the buer.
1
1
Buer is at fill line in lar
ger chamber of the container
7.
V
erify that the buer is at the fill line.
8.
Peel o the seal at the top of the ABC.
Chapter 13 Maintain the Instrument
Install buers (wizar
d)
13
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
365