Agilent Technologies InfiniiVision 5000 Series

124 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
Introduction to
Root (:)
Commands
Root level commands control many of the basic operations of the
instrument. These commands are always recognized by the parser if they
are prefixed with a colon, regardless of current command tree position.
After executing a root-level command, the parser is positioned at the root
of the command tree.
n/a :TER? (see page 161) {0 | 1}
:VIEW <source> (see
page 162)
n/a <source> ::= {CHANnel<n> |
PMEMory{0 | 1 | 2 | 3 | 4 | 5 | 6
| 7 | 8 | 9} | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
Table 34 Root (:) Commands Summary (continued)
Command Query Options and Query Returns