To Next Page

To Previous Page

Commands A-Z 6

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 537

• BITorder, ":TRIGger:UART:BITorder" on page 489

• ":BLANk" on page 130

• BURSt, ":TRIGger:UART:BURSt" on page 490

• BWLimit Commands:

• ":CHANnel<n>:BWLimit" on page 192

• ":EXTernal:BWLimit" on page 220

• BYTeorder, ":WAVeform:BYTeorder" on page 507

C • ":CALibrate:DATE" on page 181

• ":CALibrate:LABel" on page 182

• ":CALibrate:OUTPut" on page 183

• ":CALibrate:STARt" on page 184

• ":CALibrate:STATus" on page 185

• ":CALibrate:SWITch" on page 186

• ":CALibrate:TEMPerature" on page 187

• ":CALibrate:TIME" on page 188

• CAN Commands:

• ":SBUS:CAN:COUNt:ERRor" on page 375

• ":SBUS:CAN:COUNt:OVERload" on page 376

• ":SBUS:CAN:COUNt:RESet" on page 377

• ":SBUS:CAN:COUNt:TOTal" on page 378

• ":SBUS:CAN:COUNt:UTILization" on page 379

• ":TRIGger:CAN Commands" on page 422

• ":CDISplay" on page 131

• CENTer, ":FUNCtion:CENTer" on page 231

• ":CHANnel:LABel" on page 568

• ":CHANnel2:SKEW" on page 569

• ":CHANnel<n>:BWLimit" on page 192

• ":CHANnel<n>:COUPling" on page 193

• ":CHANnel<n>:DISPlay" on page 194

• ":CHANnel<n>:IMPedance" on page 195

• ":CHANnel<n>:INPut" on page 570

• ":CHANnel<n>:INVert" on page 196

• ":CHANnel<n>:LABel" on page 197

• ":CHANnel<n>:OFFSet" on page 198

• ":CHANnel<n>:PMODe" on page 571

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series