Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

540 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
6 Commands A-Z
• DISPlay Commands:
• ":CHANnel<n>:DISPlay" on page 194
• ":FUNCtion:DISPlay" on page 232
• ":SBUS:DISPlay" on page 380
• ":DISPlay:CLEar" on page 210
• ":DISPlay:CONNect" on page 572
• ":DISPlay:DATA" on page 211
• ":DISPlay:LABel" on page 213
• ":DISPlay:LABList" on page 214
• ":DISPlay:PERSistence" on page 215
• ":DISPlay:SOURce" on page 216
• ":DISPlay:VECTors" on page 217
• DSP, ":SYSTem:DSP" on page 393
• DURation, ":TRIGger:DURation Commands" on page 433
• DUTYcycle, ":MEASure:DUTYcycle" on page 281
E • EDGE, ":TRIGger[:EDGE] Commands" on page 439
• ENABle":MTESt:ENABle" on page 334
• ":ERASe" on page 573
• ERRor Commands:
• ":SBUS:CAN:COUNt:ERRor" on page 375
• ":SBUS:UART:COUNt:ERRor" on page 386
• ":SYSTem:ERRor" on page 394
• "*ESE (Standard Event Status Enable)" on page 102
• "*ESR (Standard Event Status Register)" on page 104
• EVENt Commands:
• ":HWERegister[:EVENt] (Hardware Event Event Register)" on
page 138
• ":MTERegister[:EVENt] (Mask Test Event Event Register)" on page 143
• ":EXTernal:BWLimit" on page 220
• ":EXTernal:IMPedance" on page 221
• ":EXTernal:INPut" on page 574
• ":EXTernal:PMODe" on page 575
• ":EXTernal:PROBe" on page 222
• ":EXTernal:PROBe:ID" on page 223
• ":EXTernal:PROBe:STYPe" on page 224

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English