Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Commands A-Z 6
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 539
• ":SBUS:UART:COUNt:ERRor" on page 386
• ":SBUS:UART:COUNt:RESet" on page 387
• ":SBUS:UART:COUNt:RXFRames" on page 388
• ":SBUS:UART:COUNt:TXFRames" on page 389
• ":WAVeform:COUNt" on page 508
• ":WAVeform:SEGMented:COUNt" on page 519
• COUNter, ":MEASure:COUNter" on page 275
• COUPling Commands:
• ":CHANnel<n>:COUPling" on page 193
• ":TRIGger[:EDGE]:COUPling" on page 440
• CREate, ":MTESt:AMASk:CREate" on page 323
D • DAALias, ":ACQuire:DAALias" on page 168
• DATA Commands:
• ":DISPlay:DATA" on page 211
• ":MTESt:DATA" on page 332
• ":TRIGger:CAN:PATTern:DATA" on page 424
• ":TRIGger:CAN:PATTern:DATA:LENGth" on page 425
• ":TRIGger:IIC:PATTern:DATA" on page 455
• ":TRIGger:IIC:PATTern:DATa2" on page 456
• ":TRIGger:IIC[:SOURce]:DATA" on page 458
• ":TRIGger:SPI:PATTern:DATA" on page 474
• ":TRIGger:SPI:SOURce:DATA" on page 477
• ":TRIGger:UART:DATA" on page 491
• ":WAVeform:DATA" on page 509
• DATE Commands:
• ":CALibrate:DATE" on page 181
• ":SYSTem:DATE" on page 392
• DEFine, ":MEASure:DEFine" on page 276
• DELay Commands:
• ":MEASure:DELay" on page 279
• ":TIMebase:DELay" on page 609
• DELete, ":MTESt:DELete" on page 333
• DESTination, ":HARDcopy:DESTination" on page 578
• DEVice, ":HARDcopy:DEVice" on page 579
• ":DIGitize" on page 132

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English