Dell PowerConnect 6224 - Page 103

Command Groups 103
area nssa Configures the specified area ID to function as an
NSSA.
ROSPF
area nssa default-info-
originate
Configures the metric value and type for the
default route advertised into the NSSA.
ROSPF
area nssa no-redistribute Configures the NSSA Area Border router (ABR)
so that learned external routes are not
redistributed to the NSSA.
ROSPF
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSPF
area nssa translator-role Configures the translator role of the NSSA. ROSPF
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSPF
area range Creates a specified area range for a specified
NSSA.
ROSPF
area stub Creates a stub area for the specified area ID. ROSPF
area stub no-summary Prevents Summary LSAs from being advertised
into the NSSA.
ROSPF
area virtual-link Creates the OSPF virtual interface for the
specified area-id and neighbor router.
ROSPF
area virtual-link
authentication
Configures the authentication type and key for
the OSPF virtual interface identified by the area
ID and neighbor ID.
ROSPF
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
area-id and neighbor router.
ROSPF
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by the
area ID and neighbor ID.
ROSPF
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
ROSPF
area virtual-link
transmit-delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
ROSPF
Command Description Mode*