Dell PowerConnect 6224 - Page 124

124 Command Groups
RMON
power inline powered-
device
Adds a comment or description of the
powered device type.
IC
(Ethernet
)
power inline priority Configures the port priority level for the
delivery of power to an attached device.
IC
(Ethernet
)
power inline traps Enables/disables inline power traps. GC
power inline usage-
threshold
Configures the system power usage
threshold level at which a trap is generated.
GC
show poe-firmware-version Displays the version of the PoE controller
firmware present on the switch file system.
PE
show power inline Displays the total available power, the total
power consumed in the system, and the
globally set usage threshold.
PE
show power inline ethernet Displays the inline power summary for the
interface.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
rmon alarm Configures alarm conditions. GC
rmon collection history Enables a Remote Monitoring (RMON) MIB
history statistics group on an interface.
IC
rmon event Configures an RMON event. GC
show rmon alarm Displays alarm configurations. UE
show rmon alarm-table Displays the alarms summary table. UE
show rmon collection
history
Displays
the requested group of statistics. UE
show rmon events Displays the RMON event table. UE
show rmon history Displays RMON Ethernet Statistics history. UE
show rmon log Displays the RMON logging table. UE