Dell PowerConnect 6224 - Page 1241

SNMP Commands 1241
Syntax
show snmp views [ viewname ]
• viewname — Specifies the name of the view. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of views with and without a
view name specified.
console# show snmp views
Name OID Tree Type
----------- ----------------------- ---------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded
user-view2 1.3.6.1.2.1.2.2.1.*.1 Included
console# show snmp views user-view1
Name OID Tree Type
----------- ----------------------- ----------------------------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded