Dell PowerConnect 6224 - Page 1259

SNMP Commands 1259
• view-name — Specifies the label for the view record that is being created
or updated. The name is used to reference the record. (Range: 1-30
characters.)
•
oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as
1.3.6.2.4 , or a word, such as
system . Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example
1.3.*.4 .
•
included — Indicates that the view type is included.
•
excluded — Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
Examples
The following example creates a view that includes all objects in the MIB-II
system group except for sysServices (System 7) and all objects for interface 1
in the MIB-II interface group.
console(config)# snmp-server view user-view system
included
console(config)# snmp-server view user-view system.7
excluded
console(config)# snmp-server view user-view
ifEntry.*.1 included