Dell PowerConnect 6224 - Page 1341

System Management Commands 1341
Syntax
telnet { ip-address | hostname } [ port ] [ keyword1...... ]
• ip-address — Valid IP address of the destination host.
•
hostname — Hostname of the destination host. (Range: 1–158 characters)
•
port — A decimal TCP port number, or one of the keywords from the port
table in the usage guidelines (see "Port Table" on page 1342).
•
keyword — One or more keywords from the keywords table in the user
guidelines (see "Keywords Table" on page 1341).
Default Configuration
port — Telnet port (decimal 23) on the host.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#telnet 1.1.1.1?
Keywords Table
Options Description
debug Enable telnet debugging mode.
line Enable telnet linemode.
localecho Enable telnet localecho.
<cr> Press ENTER to execute the command.
<port> Enter the port number.