Dell PowerConnect 6224 - Page 153

Using the CLI 153
VLAN From Global
Configuration
mode, use the
interface vlan
command.
console(config-
if-vlann)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Tunnel From Global
Configuration
mode, use the
interface tunnel
command.
console(config-
tunneln)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Loopback From Global
configuration mode,
use the interface
loopback
command.
console(config-
loopbackn)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Command Mode Access Method Command Prompt Exit or Access
Previous Mode