Dell PowerConnect 6224 - Page 198

198 AAA Commands
no login authentication
• default — Uses the default list created with the aaa authentication login
command.
•
list-name — Uses the indicated list created with the aaa authentication
login
command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method for a
console.
console(config)# line console
console(config-line)# login authentication default
password (Line Configuration)
Use the password command in Line Configuration mode to specify a
password on a line. To remove the password, use the no form of this
command.
Syntax
password password [encrypted]
no password
• password — Password for this level. (Range: 8- 64 characters)
•
encrypted — Encrypted password to be entered, copied from another
switch configuration.