228 Address Table Commands
•
vlan
— Specific valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port
.
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
console#show bridge address-table
Aging time is 300 Sec
Vlan Mac Address Port Type
------- --------------- ----- -------------
1 0000.0001.0000 1/g1 Dynamic
1 0000.8420.5010 1/g1 Dynamic
1 0000.E26D.2C2A 1/g1 Dynamic
1 0000.E89A.596E 1/g1 Dynamic
1 0001.02F1.0B33 1/g1 Dynamic
show bridge address-table count
Use the show bridge address-table count command in Privileged EXEC mode
to display the number of addresses present in the Forwarding Database.
To Next Page
Loading...
