232 Address Table Commands
show bridge multicast filtering
Use the show bridge multicast filtering command in Privileged EXEC mode
to display the Multicast filtering configuration.
Syntax
show bridge multicast filtering
vlan-id
•
vlan_id —
A valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, the Multicast configuration for VLAN 1 is displayed.
console#show bridge multicast filtering 1
Filtering: Disabled
VLAN: 1
Mode:
Forward-Unregistered
show ports security
Use the show ports security command in Privileged EXEC mode to display
the port-lock status.
To Next Page
Loading...
