Dell PowerConnect 6224 - Page 242

242 CDP Interoperability Commands
Syntax
show isdp
•hostname — The application will check to see if the Hostname configured
on the switch is different from the default. If true, it uses the Hostname as
the decvide ID. Otherwise, it uses the serial number as the device ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp
Timer................................ 30
Hold Time............................ 180
Version 2 Advertisements............. Enabled
Neighbors table last time changed.... 0 days 00:06:01
Device ID............................ QTFMPW82400020
Device ID format capability.......... Serial Number
Device ID format..................... Serial Number
(Switching) #
(Switching) #
(Switching) #
(Switching) #hostname Dell-PC6248
(Dell-PC6248) #show isdp