CDP Interoperability Commands 247
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source
Route,
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Intf Hold Cap. Platform Port
ID
-------------------- ----- ---- ------- ----------------- -
-------------------
Switch 1/g1 165 RI cisco WS-C4948
GigabitEthernet1/1
console#show isdp neighbors detail
Device ID Switch
Address(es):
IP Address: 172.20.1.18
IP Address: 172.20.1.18
Capability Router IGMP
Platform cisco WS-C4948
Interface 1/g1
Port ID GigabitEthernet1/1
Holdtime 162
Advertisement Version 2
Entry last changed time 0 days 00:55:20
Version :
To Next Page
Loading...
