266 DHCP Snooping Commands
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [ { static | dynamic } ] [ interface
port
] [
vlan
vlan-id
]
•
static
|
dynamic
—Use these keywords to filter by static or dynamic
bindings.
•
port
—The interface for which to show bindings. Format is unit/port.
•
vlan-id
—The number of the VLAN for which to show bindings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address VLAN Interface
Lease time(Secs)
------------------ ------------ ---- --------- --
-----------
00:02:B3:06:60:80 210.1.1.3 10 1/g1
86400
To Next Page
Loading...
