Dynamic ARP Inspection Commands 283
The following fields are displayed for each VLAN:
Example
console#show ip arp inspection vlan 10-12
Source Mac Validation : Disabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration Log Invalid ACL Name
Static flag
---- ------------- ----------- -------
-- ----------
10 Enabled Enabled H2
Enabled
11 Disabled Enabled
12 Enabled Disabled
IP Address Validation If IP address validation of ARP frame is enabled.
Vlan The Vlan-Id for each displayed row.
Configuratio
n
Whether DAI is enabled on the Vlan.
Log Invalid Whether logging of invalid ARP packets is enabled on the Vlan.
ACL Name ARP ACL Name if configured on the Vlan
Static flag If the ARP ACL is configured static on the Vlan
To Next Page
Loading...
