Dell PowerConnect 6224 - Page 380

380 IPv6 MLD Snooping Querier Commands
ipv6 mld snooping querier
Use the ipv6 mld snooping querier command to enable MLD Snooping
Querier on the system. Use the "no" form of this command to disable MLD
Snooping Querier.
Syntax
ipv6 mld snooping querier
no ipv6 mld snooping querier
Default Configuration
MLD Snooping Querier is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier
ipv6 mld snooping querier (VLAN mode)
Use the ipv6 mld snooping querier command in VLAN mode to enable MLD
Snooping Querier on a VLAN. Use the "no" form of this command to disable
MLD Snooping Querier on a VLAN.
Syntax
ipv6 mld snooping querier vlan-id
no ipv6 mld snooping querier vlan-id
• vlan-id — A valid VLAN ID. (Range: 1–4093)
Default Configuration
MLD Snooping Querier is disabled by default on all VLANs.