Port Channel Commands 437
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel l
console(config-if-ch1)#hashing-mode 4
no hashing-mode
Use the no hashing-mode command to set the hashing algorithm on Trunk
ports to the default (3).
Syntax Description
no hashing-mode
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel 1
console(config-if-ch1)#no hashing mode
To Next Page
Loading...
