IPv6 Multicast Commands 759
Syntax
show ipv6 pimsm
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm
Admin Mode.....................................
Enabled
Data Threshold Rate (Kbps)..................... 1000
Register Threshold Rate (Kbps)................. 250
SSM RANGE TABLE
Group Address/Prefix Length
---------------------------------------
FF1E::/64
PIM-SM INTERFACE STATUS
Interface Interface-Mode Operational-Status
--------- -------------- ----------------
vlan 3 Enabled Operational
To Next Page
Loading...
