Tektronix MSO58

Commands listed in alphabetical order
Conditions
Requires optio
nAFG.
Group
AFG
Syntax
AFG:AMPLitude <NR3>
AFG:AMPLitude?
Arguments
Floating point number that represents the AFG amplitude, peak to peak, i n volts.
Examples
AFG:AMPLITUDE 1.0 sets the AFG amplitude to 1.0 volts, peak to peak.
AFG:AMPLITUDE? might return :AFG:AMPLITUDE 3.0000 indicating the
amplitude is set to 3.0 Volts.
AFG:ARBitrary:SOUrce
This command sets or queries the source name for the Arbitrary Waveform.
Currently supported sources are either waveform file (.wfm) or text file (.csv).
Conditions
Requires option AFG.
Group
AFG
Syntax
AFG:ARBitrary:SOUrce <QString>
AFG:ARBitrary:SOUrce?
Arguments
<QString> is the source name.
Examples
AFG:ARBITRARY:SOURCE "E:/Waveforms/Square.wfm" sets the source
waveform to E:/Waveforms/Square.wfm.
AFG:ARBITRARY:SOURCE? might return "E:/Waveforms/Square.wfm" indicating
the source is set to E:/Waveforms/Square.wfm.
AFG:FREQuency
Sets (or q ueries) the AFG frequency, in Hz.
Conditions
Requires option AFG.
2-100 MSO54, MSO56, MSO58, MSO58LP Programmer