Commands listed in alphabetical order
Syntax
TIMe:ZONe <QSt
ring>
TIMe:ZONe?
Arguments
<QString> is a quoted string representing the desired time zone.
Examples
TIME:ZONE "America/ Yellowknife" sets the time zone to U TC delta -7.
TIME:ZONE? might return :TIME :ZONE "America/Los_Angel es".
TIMe:ZONe:UTCDELTa
This command sets or queries the time zone using the difference between the
desired time zone and UTC.
Group
Miscellaneous
Syntax
TIMe:ZONe:UTCDELTa <NR3>
TIMe:ZONe:UTCDELTa?
Arguments
<NR3> is the specified number of hours difference between the desired time zone
and UTC which is equivalent to GMT. The deltas supported are: -12.00, -11.00,
-10.00, -9
.30, -9.00, -8.30, -8.00, -7.00, -6.00, -5.00, -4.00, -3.30, -3.00, -2.00,
-1.00, 0.0, 1.00, 2.00, 3.00, 3.30, 4.00, 4.30, 5.00, 5.30, 6.00, 6.30, 7.00, 8.00,
9.00, 9.30, 10.00, 10.30, 11.00, 11.30, 12.00
Examples
TIME:ZONE:UTCDELTA -7.0e0 sets the time zone to America/Yellowknife.
TIME:ZONE:UTCDELTA? might return :TIME:ZONE:UTCDELTA -8.0000.
TOTaluptime? (Query Only)
Total number of hours the oscilloscope has been turned on since the NV memory
was last programmed, usually during the initial manufacturing process.
Group
Miscellaneous
Syntax
TOTaluptime?
2-756 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
