Tektronix MSO58

Commands listed in alphabetical order
Arguments
HORizontal spe
cifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both vertical and horizontal grid lines.
Examples
DISplay:PLOTView1:GRIDlin es Vertical sets the vertical grid lines to
display.
DISplay:PLOTView1:GRIDlin es? might return
:DISPLAY:PLOTVIEW1:GRIDLI NES BOTH indicating that both vertical and
horizontal grid lines are d isplayed.
DISPLAY:PLOTVIEW<x>:XAXIS:SCALE
This command sets or queries the horizontal scale setting for applicable plots,
either Linear or Log.
Group
Display
Syntax
DISPLAY:PLOTVIEW<x>:XAXIS :SCALE {LINEAR|LOG}
Arguments
LINEAR creates a plot with linear scales.
LOG creates a plot with logarithmic scales.
Examples
DISPLAY:PLOTVIEW1:XAXIS:S CALE LOG creates a plot with a logarithmic
horizontal scale.
DISPLAY:PLOTVIEW1:XAXIS:S CALE? might return
:DISPLAY:PLOTVIEW1:XAXIS: SCALE LINEAR indicating plots will have
linear scales.
DISPLAY:PLOTVIEW<x>:YAXIS:SCALE
This command sets o r queries the vertical scale setting for applicable plots, either
Linear or Log.
Group
Display
Syntax
DISPLAY:PLOTVIEW<x>:YAXIS :SCALE {LINEAR|LOG}
2-260 MSO54, MSO56, MSO58, MSO58LP Programmer