Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
AFG:OUTP:LOA:
IMPED FIF
sets the AFG output load impedance to 50 Ohms.
AFG:OUTPUT:LOAD:IMPEDANCE? might return
:AFG:OUTPUT:
LOAD:IMPEDANCE HIGHZ
indicating the load impedance is set to
the high impedance state.
AFG:OUTPut
:STATE
Sets (or queries) the AFG o utput state.
Conditions
Requires option A FG.
Group
AFG
Syntax
AFG:OUTPut:STATE {0|1|OFF|ON}
AFG:OUTPut:STATE?
Arguments
1 or ON turns on the AFG output state.
0 or OFF turns it off.
Examples
AFG:OUTPUT:STATE ON turns on the AFG output state.
AFG:OUTPUT:STATE? might return :AFG:OUTPUT:STATE 1 indicating the AFG
output is on.
AFG:PERIod
Sets (or queries) the period of the AFG waveform, in seconds.
Conditions
Requires opti
on AFG.
Group
AFG
Syntax
AFG:PERIod <NR3>
AFG:PERIod?
Arguments
NR3 is the floating point number that represents the AFG period value, in seconds.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-105

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English